Flooring - CFC Egypt (Metallurgical - Construction)
Main menu:
Flooring
Surface hardener for cement-based floors with basalt aggregates & special admixtures. Suitable for industrial floors, Industrial areas subjected to heavy traffic, auto repair shops, machine shops, parking lots, warehouses, Power stations etc. It is classified as CT-C70-F7-AR2, according to EN 13813.
Color : Grey & Brick-Red
Rate : Approx. 3-7 kg/m2
Surface hardener for cement-based floors with basalt aggregates and special admixtures. Suitable for industrial floors, Industrial areas subjected to heavy traffic, auto repair shops, machine shops, parking lots, warehouses, Power stations etc. It is classified as CT-C35-F5-AR2, according to EN 13813.
Color : Grey & Brick-Red.
Rate : Approx. 3-7 kg/m2
Surface hardener for cement-based floors with metallic, basalt aggregates & special admixtures. Suitable for industrial floors, Industrial areas subjected to heavy traffic, auto repair shops, machine shops, parking lots, warehouses, Power stations etc. It is classified as CT-C70-F7-AR2, according to EN 13813.
Color : Grey
Rate : Approx. 3-7 kg/m2
Two-component, solvent-free, colored epoxy system, providing high abrasion resistance, high strength and good resistant to organic and inorganic acids, alkali, petroleum products, sea water and weather conditions. It is used as a brush able coating on concrete floors, cement screeds etc., when high mechanical strength is required. It is classified as SR-B2,0-AR0,5-IR4 according to EN13813. It follows the LEED requirements for the VOC content, VOC<150 g/l.
Rate : Approx. 150-350 g/m2 /layer
Two-component, solvent free, colorless epoxy system, offering good penetration into porous substrates & good resistant to acids, alkalis, petroleum products & salt solutions. Used for Priming of cementitious surfaces that will be covered with EGYPOX, EGYPRO & EGYCOAT products, sealing coatings on cement-based floors, smoothing substrates before applying flooring layers in industrial areas, warehouses etc. It is classified as SR-B2,0-AR0,5-IR4 according to EN13813. It follows the LEED requirements for the VOC content, VOC<150 g/l.
Rate : Approx. 100-250 g/m2. depending upon surface roughness.
Two-component, solvent free epoxy transparent system, low viscosity, suitable as sealer/primer for concrete & epoxy mortar floorings & for wet concrete surface. offering good penetration into porous substrates & good resistant to acids, alkalis, petroleum products & salt solutions, also used for priming of cementitious surfaces that will be covered with EGYPOX, EGYPRO & EGYCOAT products & smoothing substrates before applying flooring layers in industrial areas, warehouses etc.
Rate : 100-250 gm/m2 to concrete depending upon surface roughness.
Two-component, solvent-free, colored epoxy system, providing high strength & abrasion resistance, resistant to organic & inorganic acids, alkalis, sea water & weather conditions. It is used as a brush able coating on concrete floors up to 0.5 mm, cement screeds etc., when high mechanical strength is required. It is classified as SR-B2,0- AR0,5-IR4 according to EN13813.
Rate : Approx. 200-250 g/m2 /layer.
Two-component, solvent-free, colored epoxy system, providing high strength Three-component, self-leveling 1 mm thick, chemical and abrasion resistant epoxy floor screed, provides an extremely high strength floor topping with exceptional resistance to abrasion & a wide range of chemicals.it is ideally suited for areas where high degrees of cleanliness are required i.e. Oil refineries & plating factories. Dairies & soft drinks factories.It is classified as SR-B2,0-AR0,5-IR4 according to EN13813. It follows the LEED requirements for the VOC content, VOC<150 g/
Rate : Approx. 1,8 kg/m2 1mm of layer thickness.
Three-component, self- leveling 4 mm thick, chemical and abrasion resistant epoxy floor screed, provides an extremely high strength floor topping with exceptional resistance to abrasion & a wide range of chemicals.it is ideally suited for areas where high degrees of cleanliness are required i.e. Oil refineries & plating factories. Dairies & soft drinks factories. It is classified as SR-B2,0-AR0,5-IR4 according to EN13813. It follows the LEED requirements for the VOC content, VOC<150 g/L
Rate : Approx. 2 kg/m2 / 1mm of layer thickness.
Three-component, high strength floor topping epoxy mortar, up to 15 mm thickness, with exceptional impact, abrasion & chemical resistance & has a safe non-slip finish for personnel & vehicular traffic. Ideally suited for heavy engineering plants, process areas, paint workshops, steelworks, oil-refineries, battery rooms & other industrial plants. It is classified as a polymer mortars according to EN 1504-4.,
It follows the LEED requirements for the VOC content, VOC<150 g/L
Color: Available in different colors
Rate : Approx. 16 kg/m2 / 8 mm of layer thickness.
Two-component, water-based epoxy coating. Especially suitable for wet or fresh (age < 28 days) concrete surfaces.It provides high resistance to abrasion, chemical effects & weather conditions.it is ideally suited for floors and walls in warehouses, light industrial, food processing areas .It is classified as a coating for surface protection of concrete, according to EN 1504-2.
Color: Available in different color combinations.
Rate : Approx. 0.2-0.3 kg/m2/layer
Two-component, water-based epoxy primer. Especially suitable for priming fresh (age < 28 days) concrete surfaces or that are subject to rising damp and will be covered with epoxy flooring systems, It provides good penetration into smooth and porous substrates, high chemical and weather conditions resistance. Also, can be used for creating a bonding layer between old & new concrete. It is classified as an impregnation for surface protection of concrete, according to EN 1504-2.
Color: Transparent
Rate : Approx. 150-250 g/m2 per layer, depending on the absorptivity of the substrate.
EGYCOAT PU is a two-component, colored protective coating for external surfaces with excellent resistance to UV radiation based on aliphatic polyurethane resins. It provides excellent glossy finish, high abrasion resistance, elasticity, good coverage and excellent adhesion to the substrate, suitable for exterior and interior applications for surfaces made of metal, concrete, render, stone, marble, wood, etc.
Color : Transparent
Rate : Approx. 90 - 180 g/m2 per layer, depending on the absorptivity of the substrate.
Two-component, solvent base, polyurethane primer. characterized by good penetration into smooth and porous substrates, high chemical and UV radiation resistance. Suitable for surfaces made of concrete, render, stone, metal, marble, wood, etc. It is classified as an impregnation for surface protection of concrete, according to EN 1504-2.
Color : Transparent
Rate : Approx. 90 - 180 g/m2 per layer, depending on the absorptivity of the substrate.
One-component, fast dry, road marking paint, for areas with high foot & road traffic, It provides Excellent resistant to climatic extremes and excellent color fastness with a very low tendency to pick up dirt. Especially suitable for road and line marking over Asphalt or concrete surfaces i.e. sport fields, road traffic lines and other ground surfaces.
Color : Available in different color combinations.
Rate : Approx. 200-250 g/m2 per layer.
