Grouts & Anchor - CFC Egypt (Metallurgical - Construction)
Main menu:
Grouts & Anchor
High-strength, non shrinking, pourable cast grout for general repairs & strengthening. Suitable for machine foundations & bearing plates, concrete jacketing & filling of cavities & cracks in concrete elements, in a thickness of (up to 100 mm). It is classified as CC R4 mortar for concrete repairs, according to EN 1504-3 & ASTM 1107 Grade C.
Color : Grey
Rate :
Approx. 2,1 kg for filling a volume of 1 liter. Or one bag yields approx.12 liter
High-strength, non-shrinking, pourable cast grout for general repairs & strengthening. Suitable for machine foundations & bearing plates, concrete jacketing and filling of cavities & cracks in concrete elements, in a thickness of (up to 200 mm). It is classified as CC R4 mortar for concrete repairs, according to EN 1504-3.
Color : Grey
Rate :
Approx. 2,2 kg for filling a volume of 1 liter. Or one bag yields approx.11.5 liter
High-strength, non-shrinking, pourable cast grout for general repairs & strengthening. Suitable for machine foundations & bearing plates, concrete jacketing & filling of cavities & cracks in concrete elements, in a thickness of (up to 50 mm). It is classified as CC R4 mortar for concrete repairs, according to EN 1504-3. & ASTM 1107 Grade B.
Color : Grey
Rate : Approx. 2,1 kg for filling a volume of 1 liter. Or one bag yields approx.12 liter
Two-component, solvent-free epoxy injection resin. It is used to repair concrete cracks 0,1-1,0 mm wide by injection & to install & anchor reinforcing rods into existing concrete elements etc. It follows the LEED requirements for the VOC content, VOC<150 g/L.
Color : Transparent yellow
Rate :
1,1 kg for filling a volume of 1 lit
Three-component, pourable, high-strength, non-shrinking cast grout. Based on a two-component solvent-free epoxy resin & on specially designed filler mix. It provides high strength, excellent bonding with steel & concrete & high resistance to impact & vibration. It is used for anchor bolts, machine bedding, bridge bearings, stanchions etc, in a thickness of (up to 40 mm). It follows the LEED requirements for the VOC content, VOC<150 g/L
Color : Grey
Rate :
Approx. 1,9 kg for filling a volume of 1 lit.
Three-component, pourable, high-strength, non-shrinking cast grout. Based on a two-component solvent-free epoxy resin & on specially designed filler mix. It provides high strength, excellent bonding with steel & concrete & high resistance to impact & vibration. It is used for anchor bolts, machine bedding, bridge bearings, stanchions etc. It can also be used as a pourable mortar for large volume repairs above 75mm thickness in damaged concrete elements. It follows the LEED requirements for the VOC content, VOC<150 g/L
Color : Grey
Rate : Approx. 2 kg for filling a volume of 1 lit.
Two-component, polyester-based anchoring adhesive. Suitable as an anchoring, adhesive for reinforcing bars, reinforcing rods, threaded rods etc. It follows the LEED requirements for the VOC content, VOC<150 g/L
