High Performance Core & Mold Coatings - CFC Egypt (Metallurgical - Construction)
Main menu:
High Performance Core & Mold Coatings
(Grey & Ductile)
EGYCOAT 211 GR
EGYCOAT 200 GR
Spirit or water based zircon – graphite coating on ready for use thixotropic slurry form.
Designed specifically for cast iron castings of any section thickness.
It has wide flexibility in terms of metal type, casting section and sand bond used.
Ensuring optimum resistance to metal penetration.
Extremely good strip and excellent as cast finish to grey &Ductile alloys.
(Pipe Production)
EGYCOAT 400 GR
Water base coating for centrifugal casting.
a specialist water base graphite zirconium base.
an ideal coating for use in the centrifugal casting process for manufacture of pipes.
Produces a uniformly fine surface of casting.
Has no tendency for blistering cracking or scaling on drying.
Provide a permeable coating with very low gas evolution
is Non-toxic, solvent free epoxy resin chemical resistant coating.
Based on epoxy resin and amine curing agents, which withstands high degrees of chemical attack.
Solvent free, suitable for use in poorly ventilated areas.
Chemical resistant to wide range of industrial chemicals
Impervious finish provides easily cleaned surface.
Anti-corrosion steel finishes coating for interior use.
EGYCOAT 200 ZR
EGYCOAT 100 ZR
Spirit or water based zircon coating on ready for use thixotropic slurry form
Designed specifically for steel castings of any section thickness
It has wide flexibility in terms of metal type, casting section and sand bond used
Ensuring optimum resistance to metal penetration
Extremely good strip and excellent as cast finish to steel cast alloys.
EGYCOAT 342
EGYCOAT 340
Ready for use water based aluminum oxide coating.
is an excellent dressing coating for dipping of cold box and shell sand cores.
Has good adhesion to the substrate.
Has no tendency to blistering, cracking or scaling on drying.
Has an excellent covering power.
Ensures gentle removal of the casting from core or moulds.
